Home / Products / Interior Products (Water Base) / Red Oxide Primer (WB/SB)

Red Oxide Primer (WB/SB)

Anti-corrosive primer for metal & walls

Red Oxide Primer (WB/SB) - Delite Paints Interior
Interior Products (Water Base)

Red Oxide Primer (WB/SB)

Delite Red Oxide Primer is a versatile anti-corrosive primer available in both water-based and solvent-based variants. It protects metal surfaces from rusting while providing excellent adhesion for topcoats. The iron oxide pigment creates a dense, moisture-resistant barrier that prevents corrosion even in humid Gujarat climate. Suitable for metal gates, grilles, railings, GI sheets, and also works on wooden surfaces. The water-based variant offers low odor and easy cleanup, while the solvent-based variant provides maximum rust protection for outdoor and industrial applications.

Anti-corrosive Available in WB & SB Excellent adhesion Rust prevention Multi-surface
Applications

Where to Use

🛡️
Metal surfaces
🛡️
Iron
🛡️
Steel
🛡️
GI sheets
🪵
Wooden surfaces
Technical Data

Technical Specifications

PropertyDetails
Base TypeWater Base / Solvent Base
FinishMatte (red oxide)
Coverage60–80 sq ft per litre (1 coat)
Drying TimeTouch dry: 1–2 hours, Recoatable: 8–12 hours
Pack Sizes500ml, 1L, 4L, 20L
Application MethodBrush, Roller
Application Guide

How to Apply

Follow these steps for the best results with Red Oxide Primer (WB/SB).

1

Remove rust, loose paint, and mill scale using wire brush or sandpaper.

2

Clean the surface with mineral turpentine to remove grease and oil.

3

Ensure the surface is completely dry.

4

Stir Red Oxide Primer thoroughly.

5

Apply 1–2 coats with brush or spray.

6

Allow minimum 8 hours drying between coats.

7

Apply enamel or topcoat after primer is fully dry.

Common Questions

Frequently Asked Questions

Should I use water-based or solvent-based red oxide primer?

Use water-based for indoor applications (low odor, easy cleanup). Use solvent-based for outdoor and industrial applications where maximum rust protection is needed.

How many coats of red oxide primer do I need?

One coat is sufficient for most surfaces. Apply two coats for heavily rusted surfaces or surfaces exposed to extreme weather.

Can red oxide primer be used on wood?

Yes. Red oxide primer provides excellent adhesion and protection on wooden surfaces, especially those exposed to moisture.

Interested in Red Oxide Primer (WB/SB)?

Get a personalized quote, shade card, or technical guidance from our team.

Request Quote Call +91 94282 66731